|
Drill Press Plugs and Plug Cutters
Issue: Issue 203
Posted Date: 8/13/2008
|
|
 |
| Click to Enlarge |
Plug cutters are another way that a drill press can really lift your woodworking to the next level. Often, wooden plugs are used to cover countersunk screws, and as such, are looked at as necessary evils rather than something that will really make a difference in your work. But by carefully making your own plugs, you can do more than just cover a screw hole• you can make that screw hole disappear!
To start, use the same lumber to make your plugs that you use to build your project. Next, take a bit of time to match the plug to the grain pattern at the screw hole location. Select from several plugs the one that best matches the grain pattern, and glue it in place, taking care to keep the glue from coming all the way up to the surface of your project. Now, with a little bit of sanding, that tight-fitting, custom-made plug will disappear.
 |
 |
| A shortcut to creating several specialty plugs in a hurry is to gang-drill a bunch of plugs at one time. Then step over to your bandsaw and slice them loose. |
| Click to Enlarge |