Eight Letter Carving Tips for Beginners

Issue: Issue 209
Posted Date: 11/4/2008

Click to Enlarge

We asked techniques editor Linda Haus to try her hand at letter carving. After several attempts she came up with the following eight tips:

1.    Use proper carving tools: knives, gouges, etc.
2.    Keep your tools sharp: hone them constantly as you carve.
3.    Use a proper cutting angle.
4.    Don't carve too deep.
5.    Print out your words/phrases.
6.    Enlarge your printout on a copier. (This keeps the spacing correct).
7.    Use a wood species that is easy to carve, (like basswood, butternut or alder) or close-grained softwoods.
8.    Don't lose the big picture: strive for consistency in depth of cut and cutting angle on each and every letter.


Knife angle is the key to achieving uniform carved letters. About 65° is where you should start. Near perpendicular is most effective as you look at the side of the knife.		Securing your stock is an important task. You also need to be able to spin the stock around easily: it allows you to easily pull the cut towards you.
Click to Enlarge


Use spray adhesive to attach your pre-printed letters to the wood. Carve pulling towards you.	At the intersection of letter segments, end the transverse, ascending and descending forms in a uniform manner.	Remove the paper and sand the surface smooth. If you're painting the carved area, leave the paper on.
Click to Enlarge

Click Here to Return to the Top of the Page

Related Articles

- Layered Color: Special Effects with Stain

- Betty's Lathe Sanding Secrets

- Making Quality That Cuts

- Rubbing Out a Gloss Finish

- Two More Must-Know Table Saw Safety Techniques

- Two Must-Know Table Saw Safety Techniques

- The Perfect Stain

- Fixing Warps and Twists

- Five Steps to Correcting Cupping

- A Complete Washout

Your browser does not support flash. If you are on a browser that does support flash then please download the latest version of the Adobe Flash Player.

Find Us On Facebook | Follow Us On Twitter