Turning chair spindles exactly the same size and with a consistent diameter used to be frustrating until I set aside my chisels and let this router jig do the job. It's simply a welded framework of steel tubing and angle iron that bolts to my lathe bed. I attached a couple of strips of lauan plywood to the top of the jig for my router to slide on. To use the jig, I chuck a blank in the lathe and an upspiral bit in my plunge router. An edge guide attached to the router base keeps the tool centered over the workpiece.

To turn each spindle, I plunge the bit down until it makes light contact with the wood, then I move the router from left to right with the wood spinning at a low speed. A series of deeper passes brings the spindle down to size, and the router's depth stop makes the final setting repeatable for as many spindles as I need. The setup works very well.

- Larry Collins; East Ridge, Tennessee

Click Here to Return to the Top of the Page
Related Articles - Store Lock Out Keys in Back of Drawer - Handy, Inexpensive Sawdust Collector - Expanding Your Shop Space - Drill Press Support - Bungee Keeps Electrical Cord Out of Harm's Way - Try Trays for Better Organization - Store Dowels in Staggered Lengths of Drain Pipe - Old Bar Stool Aids in Spray-Finishing - Shop Made Hold-Downs - Jig Simplifies Cutting Arcs on a Router Table	Advertisement