The large candles my wife and I buy for holiday decorations are usually plain round cylinders, about 3" in diameter and up to 12" tall. They're nice candles, but I wanted something a bit more unique, so I tried turning them on my lathe.

Obviously, candles aren't designed for turning. A spur drive will crack the wax and friction from a cup center will melt it. My solution is to turn wooden cups to protect the candle's ends. The cups must be sized properly, have a flat bottomed, shallow recess and narrow rim. Adding double-faced tape between the candle and the headstock cup prevents slippage during the turning operation.

I run my lathe at its slowest speed and use the turning tools in a scraping fashion. Once the shape is formed I polish the candle with a piece of silk or nylon while it's still on the lathe. The key to success is a simple design.

- Dick Dorn, Oelwein, IA

Click Here to Return to the Top of the Page
Related Articles - Vinyl Blind Lamination Spacers - Handy Push Sticks - Keep Your Pockets Clean While Turning - Fixing Errors in Plastic - Color Coding Bits - Cleaning Pocket Hole Joinery - Simple Shop Divider - Small Item Storage - A New Laminate Spacer - Sanding Disk Alignment	Advertisement