A Miter Saw Station for Many

Sometimes being Woodworker’s Journal’s “Field” Editor, I feel like I’m way, way out in some field. What I mean here is, I’m one step removed from the day-to-day feedback we receive in our home office from readers about what we publish. A lot of mail comes in, but generally I don’t get to see it. I work from home, which is several states away.

Well, thanks to this blog, I’m getting quite a lot of feedback from you regarding the “Ultimate Miter Saw Stand” I built for the June 2010 print issue. It seems to be resonating well with many who are looking for a better place to put their miter saws. Lots of you are asking for a Cutting List to help build it, and I’m happy to forward a PDF to anyone that needs it. Just leave a comment and I’ll send it to you.  Click Here to download the Cutting List.

EDITOR’S NOTE: Due to the enormous amount of interest in this project, we have made the Ultimate Miter Saw Stand (including the plans for the entire project, the Cutting List, the correction listed below, and the plans for optional Scrap Bins) available as a Downloadable Plan in our online store. Click here to purchase and receive the plan immediately!

So, thanks for your interest in the project! When I designed it, I was a bit concerned that its overall size would be too big for many shops. That doesn’t seem to be a problem—or you are changing the proportions as needed to fit your space. Good deal!

Two more things in this regard:

1) Email us a photo of your completed Miter Saw Station if you build it. It’s always fun to show nice reader projects both here on the blog and in the “Letters” section of the print magazine. Your photo might give others a boost to get out there and build one for themselves.

2) There is one mistake in the Sides/Divider Panels drawing on page 42 that I’d like to point out (a reader caught it a while back): the spacing between the two shelf dadoes is 11 1/4″, not 18″ as originally appeared in the print magazine.

Lastly, if there are shop projects you’d like to see us design and build for future print issues, let me know in the comment section below. I’ll be happy to throw them into the collective hopper as we plan for the future. We’re always looking for fresh ideas.

Catch you in the shop,

Chris Marshall, Field Editor

EDITOR’S NOTE: Due to the enormous amount of interest in this project, we have made the Ultimate Miter Saw Stand (including the Cutting List, the correction listed above, and the plans for optional Scrap Bins) available as a Downloadable Plan in our online store. Click here to purchase and receive the plan immediately!

  • Larry Crouch

    Looks great to me. I really like the bench being on wheels. Thanks for sharing.

  • Douglas Palmer`

    I do not have a Miter saw. But I do have a Radial Arm Saw. I think I am going to take the project plans and work them over a bit to incorporate my Radial Arm into it. A challenge but it looks easy enough to me.

  • Eric Anderson

    Looks great – I’ve been looking for a mobile station to build for my garage and this looks to fit the bill (with a few small modifications of course). Would be much appreciated if you could send the instructions / cut list.

    Thanks.

  • Eric Yunginger

    I’m in the middle of remodeling my basement, complete with a small workshop to complement my garage (which in a matter of a half hour can go from ‘car parking’ to ‘full wood shop’ thanks to portable tools!). I’d been thinking about a bench similar to this for the basement, and would love the plans!

    • Chris Marshall

      Eric,

      Check your email for the project PDF.

      Thanks,

      Chris

  • Jeffrey Schnell

    I like it

  • http://www.Sollows.ca Jim

    I was just browsing for ideas for a mitre saw stand. This is exactly what I was looking for! I would love to get the plans!

  • Dave Thomas

    I’d love to have the PDF and see if I can find some space to my setup to add a workstation like this. Thanks!

    • Chris Marshall

      Dave,

      Check your email for the project PDF.

      Thanks,

      Chris

  • Al Greer

    Would love a copy of the cutting list for this project.

    • Chris Marshall

      Al,

      Check your email for the project PDF.

      Thanks,

      Chris

  • John Swayze

    Please, please send the cutlist! This is one of the best miter saw stations I’ve ever seen, and looks quite amenable to customization.

  • Pingback: Ultimate Mitre Saw Bench - Woodwork Forums

  • Peter Dunphy

    Newbie at wood working.. recently acquired a Miter saw could really use a “mobile station for it.
    Thanks in advance for the cutting list.

    • Chris Marshall

      Peter,

      Check your email for the project PDF.

      Thanks,

      Chris

  • Dean

    Chris, is the Cutting List you mentioned the same as the “Material List” shown on page 43 in the June 2010 issue of Woodworker’s Journal? If not, I’ll take a copy of the pdf please. Thanks!

    • Chris Marshall

      Dean,

      Check your email for the project PDF.

      Thanks,

      Chris

  • http://sfees2@cox.net Anthony Fees

    Chris:
    I would like a PDF of the material list along with the cut list and plans. When I saw this mitre saw station it has all the features one would ever need.
    Thanks

    Anthony Fees

    • Chris Marshall

      Anthony,

      Check your email for the project PDF.

      Thanks,

      Chris

  • Bill Walker

    Looks great, I would love to have the plans for this miter station

    • Chris Marshall

      Bill,

      Check your email for the project PDF.

      Thanks,

      Chris

  • LINDA DESGROSEILLIERS

    Love the mitre station. Would like to build it. Please send the cutting list. Love your magazine….

    • Chris Marshall

      Linda,

      Check your email for the project PDF.

      Thanks,

      Chris

  • Gerald Garrison

    Chris,

    I liked the looks of the miter saw mobile work station when I saw it in the print issue and would appreciate your sending the cut list via email. I think it will fit right in in a space I have in my shop. Thanks,

    • Chris Marshall

      Gerald,

      Check your email for the project PDF.

      Thanks,

      Chris

  • Thomas Scarboro

    Chris;

    I received your cutting diagram and list. Is the overall assembly drawing available in PDF format and if so please forward it to me.

    Thanks very much.

    Tom

    • Chris Marshall

      Tom,

      The rest of the drawings you’ll need are provided in the June print issue of the magazine. The cutting diagram you just received from me supplements those drawings.

      Thanks,

      Chris

  • Dennis Brouwers

    Miter Saw Station, would appreciate you sending me the cut list via email I will look at the june issue. Thank you

    • Chris Marshall

      Dennis,

      Check your email for the Miter Saw Station Cutting Diagram.

      Hope you enjoy building the project!

      Chris

  • Andrew Trowbridge

    Chris,

    I just bought the June issue and I am looking forward to building this mitre saw station. I am wondering if you could tell me how many pieces of the 3/4 plywood it took to get all the pieces. If you have a diagram I would appreciate it if you could email that to me. If not no worries, but I think having that diagram would cut down on extra trips to the hardware store.

    Thanks for sharing the project, looks very functional for a smaller shop.

    Andy

    • Chris Marshall

      Andrew,

      Check your email for the Miter Saw Station Cutting Diagram.

      Thanks, and good luck with the project!

      Chris

  • Will

    Gret project, been thinking about doing this for some time

  • steve

    Hi Chris,
    Could I get the pdf as well? Also I’m surprised the magazine does not sell PDF’s of the print issue. I’d much prefer to keep an electronic copy vs the magazine itself. Maybe an fyi for your editors.
    Cheers,
    Steve

    • Chris Marshall

      Steve,

      Please check your email for that Cutting Diagram PDF.

      Hope you enjoy building the project!

      Best,

      Chris

  • James T

    Thanks for posting this…thinking I will build a semi-stationary version and add my radial arm saw to it…

  • Pete

    I have a Crafsman 12″ sliding compound mitersaw that tilts to the right. Will my saw fit in this stand OK?
    Thanks

    • Chris Marshall

      Pete, it’s hard to say without measuring the saw and how much space it takes up swinging left and right. The stand might also have a wider footprint than a fixed compound miter saw. But, you could always change the size of the sliding carrier the saw sits on as well as the side support tables to accommodate it. I would guess your saw’s sliding rails will also extend past the back of the Miter Saw Station, so you’d have to keep the Station pulled out some from the wall.

      Hope this helps,

      Chris

  • Pete

    Chris, Thank you for your reply. My 12″ SCM saw fits nicely on the stand but, like you said I have to keep it pulled out from the wall a little. I saw in the HD ad today where they have a Ridgid WD1278 5HP shopvac on sale for 29.99. That’s 48% off.
    Should fit nicely in my stand. It looks like the one you have in your stand.
    Thanks again for your comment/s.

  • Joe Zagula

    Chris

    Great project. Can you send me the cut list?

    • Chris Marshall

      Joe,

      Just sent the PDF to your email address.

      Thanks,

      Chris

  • Jimmy

    I am planning on reworking my shop and this stand looks like it will fit in nicely. Please send me the pdf cut list. Tks

    • Chris Marshall

      Jimmy,

      I just emailed you the Cutting Diagram PDF.

      Thanks,

      Chris

  • Morris Shapiro

    I just saw this project. It looks great! Like another responder, I have a radial arm saw that I would like to adapt to this. Any recommendations? I, too, would like to have a PDF and cutlist of the project.

    Thanks,
    Morris

  • Richard Snider

    I saw the article and thinking of building it. I intend to install more drawers for storage of other tools and supplies. Would appreciate the cutting diagram.

    • Chris Marshall

      Richard,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • http://yahooat&t LESTER WALLACE

    would love to have the pland on the compound miter saw table thanks Lester

    • Chris Marshall

      Lester,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Ken Campbell

    Chris, please send a copy of the .pdf for your Miter Saw Station. Thank You!

    • Chris Marshall

      Ken,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Lyn Savage

    Sirs:

    I too would like a PDF Diagram and a cutting – materials list.
    I had the June 2010 issue but (believe it or not because this sounds an awful lot like “the dog ate my homework”) but my cat had a hairball and well…….. the magazine didn’t fair well shall we say:)

    Thank you. I will be more than happy to send a pix when done….an example of a 61 yr old gal’s handywork.

    • Chris Marshall

      Lyn,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Vincent Rosati

    Please send cutlist. Looks good for a RAS.

    Good idea!

    Thanks

    • Chris Marshall

      Vincent,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Al Krier

    Looks great. I would like a copy of the cut list and plans if you have them. I’ll need to change some dimensions to fit into my garage but can definitely use the basic plans. Thanks

    • Chris Marshall

      Al,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Kevin Harwood

    Hi Chris, great looking miter saw station! I would really appreciate it if you would send me a copy of the project PDF. Thanks in advance.

    • Chris Marshall

      Kevin,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Jimi_B

    I would like to have a copy of that PDF if I may, please? Thank you for your generosity.
    Jimi

  • Brian Smith

    Chris,

    I have been looking to upgrade my portable miter station and this one looks like it will work great. I would love to have the plans and cut list.

    Thanks,
    Brian

    • Chris Marshall

      Brian,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Michael Case

    Hello Chris,

    I love the Ultimate Mitersaw Workstation, If at all possible I would Like the material and cut list for this project.

    Thanks
    Michael Case

    • Chris Marshall

      Michael,

      Check your email for that Miter Saw Station cutting diagram.

      Thanks for your interest in the project!

      Chris

  • Rob

    Chris,

    This looks like a fun project. Please send the cutting diagram.

    Thanks,
    Rob

  • Judy

    This Miter Saw station is exactly what I have been looking for. What a great way to store cutoffs that seem to be forever building up. Can you send me the PDF?

    • Chris Marshall

      Judy,

      Check your email for that Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project,

      Chris

  • Jason

    Hi, I’d love a cutlist. Also, will this station accomodate a 12″ slider? Are the full plans available somewhere?

    Thanks

  • Paul Buchta

    Chris,

    I have been looking for the ideal miter saw station for quite awhile and I think this is it. I would love to build it and would greatly appreciate the cutting diagram for this project.

    Thank you,

    Paul Buchta

    • Chris Marshall

      Paul,

      Check your email for that Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project,

      Chris

  • Jesus Rocky Rodriguez

    It will nice if I can get a copy of you drawing and see if I can build one just like it will be a great addition to my shop Thank you !!

  • JD

    Hey Chris,

    Love the mitre saw station! It’s just what I need for my shop.

    I’d be much obliged if you would send the PDF.

    Thanks!

    JD

    • Chris Marshall

      J.D.,

      Just sent the PDF to your email address.

      Thanks,

      Chris

  • http://www.buckinbuffaloadirondack.com Trenton

    I would like a copy of the pdf for the miter saw cutting diagram. It looks great. I am hoping to incorporte the my central dust collection system into these plans.

    Thanks,

    Trent

    • Chris Marshall

      Trent,

      Just sent the PDF to your email address.

      Thanks,

      Chris

  • Joseph J. Ice

    Hey,
    Really great station, it is especially suited for the shop where you do more than bird houses and coasters for sweating glasses. The mobility is well thought out as is everything else on this project. A senior editor of one of those snooty WoodWorking Magazines could not do as good even with their large staff helping them. It surly is a prize and I am looking forward to the PDF so I can have one just like this one in my shop. THANK YOU, Joe

  • Tom M

    I just saw the “A Miter Saw Station for Many” and really liked it. I especially like the mobility factor. I have a small work space (my garage) so mobility is important. Could you please forward plans the the saw station to me?

    Thanks, Tom M

    • Chris Marshall

      Tom,

      Check your email for the Miter Saw Station PDF Cutting Diagram.

      Hope you enjoy building the project,

      Chris

  • Jay Moore

    please send the PDF for the Miter Saw Station Cutting Diagram

    Thanks,
    Jay

    • Chris Marshall

      Jay,

      Check your email for the Miter Saw Station PDF Cutting Diagram.

      Hope you enjoy building the project,

      Chris

  • Jamie Spencer

    Can I have a copy of the PDF to thanks.

    Cheers

    Jamie

    • Chris Marshall

      Jamie,

      Check your email for the Miter Saw Station PDF Cutting Diagram.

      Hope you enjoy building the project,

      Chris

  • April

    Could I please have a copy of your plan by email. Is it necessary or helpful even to add a dust hood?

    • Chris Marshall

      April,

      Check your email for the Miter Saw Station PDF Cutting Diagram.

      Hope you enjoy building the project,

      Chris

  • Rob

    Chris, the mitre saw station looks great. I would love a copy of the pdf if possible.

    Cheers, Rob

    • Chris Marshall

      Rob,

      Please check your email for that cutting diagram. Thanks for inquiring about this project!

      Best,

      Chris

  • Jeff

    Hi, Please send the pdf for the mitre saw station. Looks great.

    Jeff

  • Kevin

    Chris

    This is a great space saver with the extra storage, beautiful job.
    I would love to get the plans for this.

    • Chris Marshall

      Kevin,

      Just emailed you that cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,

      Chris

  • manuel

    I would like to have a copy.- Thanks.-

    • Chris Marshall

      Manuel,

      Just emailed you that cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,

      Chris

  • STEVE BRADLEY

    Chris

    Great looking piece of work, pls send the PDF File.

    Thanks

    Steve

    • Chris Marshall

      Steve,

      Just emailed you that cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,

      Chris

  • Lonnie Miner

    I would love to have a copy of the pdf for the miter saw station. If possible please email it to me. Thanks a lot.

    • Chris Marshall

      Lonnie,

      Just emailed you that cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,
      Chris

  • Mike

    Chris, I am a loyal reader of the WWJ E-magazine. I really enjoy all the info, hints and projects. Could I get a copy of the pdf for the “Ultimate Miter Saw Stand”? I’m just a 60 yr old intermediate sawdust maker, but enjoy making some of the projects. Keep up the good work.

    • Chris Marshall

      Mike,

      Please check your email for the Cutting Diagram. Thanks for inquiring about the project, and hope you keep making sawdust!

      Best,

      Chris

  • Bill West

    Please send the pdf for the mitre saw station. Thank you for your generosity.

    • Chris Marshall

      Bill,

      Please check your email for the Cutting Diagram.

      Thanks for inquiring about the project,

      Chris

  • Stephen C

    Love the look would love to build one and be the first in scotland to have one
    thanks
    Stephen

    • Chris Marshall

      Stephen,

      I just emailed the cutting diagram to you. Hope you build the project and give this Miter Saw Station some global perspective!

      Best to you,

      Chris

  • Bob DiLorenzo

    Chris,

    I’d like to see that pdf.

    Thanks,

    Bob

    • Chris Marshall

      Bob,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for your interest in the project!

      Best,

      Chris

  • Bob

    Nice clean looking design. I have a 12 inch fixed duel bevel Bosch which I love to death. At my age simplicity and large scales are the selling factor for me. Will you cut list work well for my Bosch? If so i’d appreciate a copy. Thanks

    • Chris Marshall

      Bob,

      You should be able to modify this Miter Saw Station easily to fit your dual-bevel Bosch saw. The biggest issue, really, will be resizing the moveable saw platform so it’s wide and deep enough to suit Bosch’s base (and, it may require no modification at all). The other important dimension will be how tall your saw’s base is and then rectifying that with the project material list.

      I just emailed the cutting diagram to you. Good luck with your project!

      Best,

      Chris

  • Terry Reiman

    I would like to receive a pdf. of the miter saw project. Thank you for some great information in past issues and hope you continue the good work.

    Thank you,

    Terry

  • Ernie Kachaturian

    I ran across your video on the miter saw stand as I was looking for some ideas for something I need to build.

    It was well thought out and just what I was looking for. I would like to take advantage of your offer for a cut list and a pan if available.

    Keep up the good work and thank you.

    • Chris Marshall

      Ernie,

      I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,

      Chris

  • George Bailey

    Perfect project for me, a new hobbyist setting up my own small shop. Please send .pdf file. Thank you.

    GB

    • Chris Marshall

      George,

      I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,

      Chris

  • Russell

    Hi Chris,

    The miter saw station looks great. I was planning on building one soon, but I’m waiting for the new Bosch Gliding miter saw to come out next month. I would appreciate if you could send me the PDF cutting diagrams to assist me in my project.

    Thanks,

    Russell

    • Chris Marshall

      Russell,

      I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,

      Chris

  • Bob Smith

    I would like a copy of the pdf, material list, etc. for this project, A Miter Saw Station for Many. I’m building a new shop and want to add it too my shop for organization, ease of use. I was thinking also about adapting it to use alternatively with my 13 1/2″ planner.

    • Chris Marshall

      Bob,

      I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it! I like your idea of retrofitting it to work with a benchtop planer. I’d like to see that variation in a few photos if you build it. We’ll try to share them with other readers, too.

      Best,

      Chris

  • Terry Boeholt

    Chris,

    I would also like the PDF of the plans for the Ultimate Miter station.

    Very nice job!

    Thanks,

    Terry

    • Chris Marshall

      Terry,

      I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it!

      Best,

      Chris

  • Dave Lewis

    Hi Chris,

    Your miter saw station looks very compact. I am planning on building a workshop and this looks like it would fit in my plans. I would appreciate if you could send me the PDF cutting diagrams to assist me in my project.

    Thanks,
    Dave

    • Chris Marshall

      Hi Dave,

      Just emailed you that cutting diagram. Good luck with your future shop—and projects!

      Best to you,

      Chris

  • Norris Tait

    Hello; I am reorganizing my shop (new permanent dust collector system) This saw station will work out perfect in my shop. The pdf. would be very appreciated. Looks very well built. thank you.

    • Chris Marshall

      Norris,

      Check your email for that PDF you requested for the Miter Saw Station.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Tim McDonald

    Nice station. Would love to see the PDF as well.

    • Chris Marshall

      Tim,

      Please check your email for the miter saw station cutting diagram you requested.

      Thanks for your interest in the project!

      Best,

      Chris

  • Bill Stanley

    Nice Project, I would like the Cut List also.
    Thank You Bill

    • Chris Marshall

      Bill,

      Please check your email for the miter saw station cutting diagram you requested.

      Thanks for your interest in the project!

      Best,

      Chris

  • Mike D

    Chris,

    Great article! Can you email the cutting diagram for the project to me as well? Looks like it takes about 5-6 sheets by my rough calculation…. Thanks ahead of time for your help!

    Mike

    • Chris Marshall

      Mike,

      Check you email for that cutting diagram. You’ve got it right—five sheets are required for the project. Thanks for inquiring about it.

      Best,

      Chris

  • Kevin

    Chris,

    I would also like the PDF of the plans for the Ultimate Miter station.

    Very nice job!

    Thanks,

    Kevin

    • Chris Marshall

      Kevin,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Tim Gavin

    Ok Chris, everyone else has been asking fir the pdf. I have benn wanting to build one of these for ever. I like the design. Please send. Thanks!

    • Chris Marshall

      Tim,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Bob Horner

    Dear Chris,

    A well thought-out miter station. I am in the midst of redesigning my shop to make more space and decided to sell my radial arm saw in favor of a miter saw. I now have an older DeWalt 12″ compound miter saw (love it, but cross cuts only 8″), but when I saw the new Bosch glide saw, I decided to wait for that one and will build the miter station around it. A typical sliding miter saw needs too much depth clearance.

    Thanks for a great design. Could you please send the cutting list?

    Bob

    • Chris Marshall

      Bob,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Able Cross

    love that miter saw stand,,,,would love the plans,,,,thanks

    • Chris Marshall

      Able,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Jim Warneke Sr.

    I’d love more info on your Mitre Saw station. I’ve wanted to make a dedicated area for my shop for a long time instead of just clamping mine in a workmate.

    Jim

    • Chris Marshall

      Jim,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Tom Gibbons

    Great project! Can I also get the pdf plans

  • Greg

    Awesome setup!! Please send me the .pdf, I now have a project for my 3 day weekend!!

    • Chris Marshall

      Tom,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

    • Chris Marshall

      Greg,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Stephen

    I would like to get a copy of the cut list. This is my next project as soon as I finish a sewing table for my wife.

    • Chris Marshall

      Stephen,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • David Troup

    Chris,

    I would also like the PDF of the plans for the Ultimate Miter station.

    Very nice job!

    Thanks,

    David

    • Chris Marshall

      David,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Jen Que Louie

    Chris Marshall,

    I read your article with great interest as I retired recently and decide to put up crown molding in a few rooms. I clamped my compound miter saw to a low painter’s scaffold and build four ancillary support blocks for the over hanging stock. After the project was completed and I’ve toyed with the idea of getting back into woodworking

    So for the past few months I pondered how I would setup my small shop and what tools would make-up my core pieces. The miter saw was first on my list and I researched many possible work solutions. I read your article “Ultimate Miter Saw Stand” and it appears to be good starting foundation for my quest. I would greatly appreciate a PDF copy of your project. Thank you for your time and efforts. JQL//

    • Chris Marshall

      JQL,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Thomas Mahoney

    That station looks great. Do you have a cut list for it?
    Thanks,
    Tom

    • Chris Marshall

      Thomas,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Paul Manneck

    I’d love to get the .pdf. I think i will need to modify it with folding “wings”. I don’t have the room for it.

    • Chris Marshall

      Paul,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Bill

    Chris

    The Miter Saw Station looks great. Building my shop area and had wondered what to do for my Miter Saw. Now I know. Is it possible to get a copy of your cutting diagram for the bench?

    Be safe
    Bill

    • Chris Marshall

      Bill,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Richard Thorsen

    I really like the “Ultimate Miter Saw Stand”. I would like to build it also. Would you please send me the pdf file.

    Thank you, Great job!
    Richard

    • Chris Marshall

      Richard,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Adam

    Chris-
    I am definitely building this. Could I get the cut list as well? Also I would like to know,
    1 what kind of plywood you chose?
    2 how you finished it?
    3 when you say nail the face frame to the carcass, what do you use? pin nailer? brad? size? remember I am a novice. etc..
    4 if you wanted to make the fences removable, what would you do?

    you rock!

    Adam

    • Chris Marshall

      Adam,

      Thanks for your kind words and your interest in the project. Check your email for the cutting diagram.

      To answer your questions:
      1) I used five sheets of maple veneer plywood to build the project, but any cabinet-grade plywood with a nice face would work fine.
      2) I finished the station with water-based poly, because it was early spring and I needed to keep the shop closed up and heated. Water-based poly doesn’t smell as bad as oil-based and dries really quickly.
      3) I used an 18-gauge brad nailer and 2-in. brads to nail the face frame to the carcass. You could hand-nail it with finish nails if you don’t have an brad nailer yet, or biscuits instead. I would definitely go with more than just glue to secure this big face frame in place.
      4) You could use bolts and nuts or wingnuts to make the fences removable instead of wood screws, as I used here. Removable fences might actually make this project even more versatile, because you could use those side support areas for other shop uses too. Be creative!

      Enjoy the project,

      Chris

  • Les Gorton

    That looks to be one of the nicest miter saw stations I have seen. I have been going to build one and I would appreciate the PDF file. Very nice job Chris. Thank you Les Gorton

    • Chris Marshall

      Les,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Gary High

    I have been looking for a great miter saw station to replace the one I had to leave behind when we moved. Will you please send me a copy of your plan/cutting list.

    Thank you,
    Gary

    • Chris Marshall

      Gary,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Tim

    I have a question on the “doubling” of the plywood panels in the center of the stand. Was this so it would be simpler to essentially build three cabinets, was it required for extra strength, was it so there would be more strength where there were two dados across from each other or some other reason? Just wondering as I looking to put together a materials list for the project and with the 3/4″ back panel it would seem to be very sturdy without the doubling of the panels.
    Please forward a cutting diagram to me as well.
    Thank you very much.

  • Darcy Sheaffer

    I think that the Miter Saw station is great. This type of station would fit nicely into my shop. Please send be a pdf of the project.

    Thanks in advance,

    Darcy Sheaffer

    • Chris Marshall

      Darcy,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • John

    I would like the cutting list too. Thanks for what appears to be a great project!

    • Chris Marshall

      John,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Zeke Galloway

    Chris

    I like the looks of this miter saw station. Please send me a set plans via my email address.

    Thanks

    Zeke

    • Chris Marshall

      Zeke,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Poppa Rob

    Hey I would like to get a PDF copy of the June Ultimate Miter Saw Station, any and all help that you can send me as I am not a wood person yet, this will be one of my first project to get into this, I am disable and learning to re-educate myself to do other things to make money,

    Poppa Rob

    • Chris Marshall

      Rob,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • bob milner

    i sure did like your miter saw station.could i get a set of plans ,with a cut diagram. this is something i would like to build. where in ohio do you live? i live north of wooster
    thanks
    bob

    • Chris Marshall

      Bob,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • James Swayze

    Great project! Perfect for me! May I have the PDF?

    • Chris Marshall

      James,

      Please check your email for that cutting diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Brad

    Great design! I’d love the plan as well.

    Brad

    • Chris Marshall

      Brad,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Steve

    That looks great! I’ve been thinking about a miter stand like this for a few weeks. I’d love to see the plans.

    • Chris Marshall

      Steve,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Phil Manno

    Very impressive miter saw station! Please send the PDF. Thanks in advance
    -Phil

    • Chris Marshall

      Phil,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Kevin

    Chris, Please send me a PDF copy of the miter bench.
    Thanks

    Kevin
    krjd4440@hotmail.com

    • Chris Marshall

      Kevin,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • John Nettles

    Yap I want a diagram to :-)

    • Chris Marshall

      John,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Vadym

    Hi Chris,

    Could you please, send me cutting diagram of your ultimate miter saw station.

    Thanks,
    Vadym

    • Chris Marshall

      Vadym,

      Please check your email for that cutting diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • tom goldsmith

    This saw station is just what I need. Please send pdf link. Thanks

    • Chris Marshall

      Tom,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Simone Russo

    Chris,
    your Miter Saw Station is beautiful!

    Can you send me the cut list, please? Thanks in advance.

    Very nice job :)

    Simone

    • Chris Marshall

      Simone,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • john nickholds

    fantastic project one i would love to attempt can you send me all the info avaliable and i will send you acopy of my completed one regards john

    • Chris Marshall

      John,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • S. White

    I am interested in your Miter Saw Station. Could you send me a copy of your plan and cutting diagram? Could it be broken down into modular units allowing for moving around in a small shop/garage?

    • Chris Marshall

      You could probably break the unit down into three pieces—the two cabinets for storing offcuts and the center cabinet with doors. My biggest concern would be figuring out how to bring the three together any place on your shop floor and have the tops of all three units still be flush. One advantage to making project as is, is that the support tables never fall out of alignment with one another. If you do make the station more modular, send us some photos to show how you worked it out!

      Thanks for your interest in the project!

      Best,

      Chris

  • Bob Richardson

    I would also love the pdf’s.

    Thanks

    Bob

  • Michael Borg

    I was just talking about a mitersaw station with another woodworker today and we are needing these plans
    Thanks
    Mike

    • Chris Marshall

      Mike,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for your interest in the project!

      Best,

      Chris

  • Rian

    Hey Chris,

    I’m in the process of converting my garage into a shop and you miter saw station would make a great addition. Could you send me a copy of the cutting diagram?

    Thanks
    Rian

    • Chris Marshall

      Rian,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for your interest in the project!

      Best,

      Chris

  • Brandt Weaver

    I’d like to get a cut list too.
    Thanks!
    Brandt

    • Chris Marshall

      Brandt,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for your interest in the project!

      Best,

      Chris

  • denis browne

    this looks just right for me to put in my new shed as i just lifted my saw onto the work bench please forward plans thank you denis

    • Chris Marshall

      Denis,

      Please check your email for that cutting diagram.

      Thanks for your interest in the project!

      Best,

      Chris

  • Boyd

    This workstation looks great! Can I please have the PDF as well?

    Thasnks.

    Boyd

    • Chris Marshall

      Boyd,

      Please check your email for that cutting diagram.

      Thanks for your interest in the project!

      Best,

      Chris

  • william leach

    This looks really great. I would love to build the same, Please send the PDF..Thanks a lot.

    • Chris Marshall

      William,

      Please check your email for that cutting diagram.

      Thanks for your interest in the project!

      Best,

      Chris

  • John

    I would love the .pdf of these plans. This bench will be perfect for my workshop.

    Thanks,

    John

    • Chris Marshall

      John,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • http://nositeyet! eric

    can you send me a plan please. love the bench!!

    • Chris Marshall

      Eric,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • John P. Bennett

    Please send me a .pdf file for the plans.

    It is exactly what I have been looking for.

    Thanks,

    John

    • Chris Marshall

      John,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about it!

      Best,

      Chris

  • Will

    Please send me the plan, this looks great

    • Chris Marshall

      Will,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • http://none Beach Guy

    Yes. Please send the PDF cut list. A very practical design. I plan on adding the new 12″ dual bevel glide miter saw. Do you have a plan for a dust collection hood that is large enough and hinged to cover the saw and lock for safety? I have a 2 year-old grand-daughter that is getting very curious.

    Thanks

    • Chris Marshall

      Beach Guy,

      Please check your email for that cutting diagram. We don’t have a plan for a locking hood for a miter saw, but it sounds like a good idea. Could even make your saw less prone to getting stolen. If you design the hood, send photos to the magazine so we can see the result!

      Best,

      Chris

      • Chris Marshall

        Beach Guy,

        Your email address doesn’t appear to be correct. Messages are bouncing back. Please double-check that so I can send you the miter saw station cutting diagram.

        Thanks,

        Chris

  • Cary

    Great design. I too have a 12 inch fixed duel bevel Bosch. Will it fit your plans?

    • Chris Marshall

      Cary,

      The Craftsman-brand saw I’ve got on my miter saw station is also dual-bevel, and the project accommodates that feature just fine. You may need to adapt the height of the carriage that slides back and forth and holds the saw in order to fit it to your Bosch, but I don’t see why the rest of the project wouldn’t be suitable for the saw.

      Good luck with the station, and thanks for your interest!

      Best,

      Chris

  • Bill S

    I would appreciate a copy of the plans. Thank you.

    • Chris Marshall

      Bill,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about it!

      Best,

      Chris

  • http://Woodworker'sJournal Lawrence

    Great Idea I could use in my shop. Please send the PDF so I may get started.
    Thanks

    • Chris Marshall

      Larry,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about it!

      Best,

      Chris

  • http://Woodworkersjournal.com Captain Wayne Kruger, USN

    Mitre Saw station is excellent and particularly beneficial with the added mobility. I would appreciate receiving the plans for it. Thanks, Wayne K

    • Chris Marshall

      Captain Kruger,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about it!

      Best,

      Chris

  • Roger

    Great looking project! Please send the pdf. Thanks

    • Chris Marshall

      Roger,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about it!

      Best,

      Chris

  • Wayne Wheeler

    Very functional work station…something that I would like to build and tie into my radial arm saw at one end. Please send me a PDF of materials list and any other helps to assist in building this project.

    Thanks,

    Wayne

    • Chris Marshall

      Wayne,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about it!

      Best,

      Chris

  • Patrick Gauthier

    A Miter Saw Station for Many…. Can I please have the PDF as well?

    Thanks.

    Patrick

    • Chris Marshall

      Patrick,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • http://www.woodworkersjournal.com/woodworking_blog/index.php/closer-look-at-our-full-featured-miter-saw-station/ Brian Hebert

    Great looking project! Please send the pdf. Thanks

    • Chris Marshall

      Brian,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Craig Russell

    Please send me a pdf plan

    • Chris Marshall

      Craig,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Jon

    This would work perfect in my new workshop/shed. If you could send me the PDF, I’d appreciate it greatly!

    • Chris Marshall

      Jon,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Francisco

    I found your wonderful this project. I would appreciate the plans.
    Thank you for your attention.

    Francisco

    (Sorry about the flaws in English. I live in Brazil and use google translator)

    • Chris Marshall

      Francisco,

      Please check your email for the Miter Saw Station Cutting Diagram.

      Thanks for inquiring about the project!

      Best,

      Chris

  • Ric Smith

    Looks just like what I have in my mind, but unable to put it on paper. Just the stand everyone should have. Thanks

    Please sent some plans

    Ric

  • robert mullinax

    please send me the plans for the Miter Saw Station Cutting Diagram.thanks robert

    • Chris Marshall

      Robert,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Ken Wulff

    I’ve been searching for exactly this project. It seems I’m a little late to the project but would love the cutting diagram for the Mitre station.
    thanks in advance
    Ken Wulff
    ps. I used the recent dovetail jig for a guitar amp case of white pine- worked great.

    • Chris Marshall

      Ken,

      You’re never too late! Please check your email for that Miter Saw Station Cutting Diagram. Thanks for your interest in the project.

      Best,

      Chris

  • http://WoodworkersJournal Arthur Goff

    Great miter saw station. would love the plans.

    Thanks
    Arthur

    • Chris Marshall

      Arthur,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • stephen rosenberger

    Would love to have the pdf. I desperately need a miter saw stand

    • Chris Marshall

      Stephen,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • http://woodworkersjournal dean van zanardi

    could u please send me your plans for the miter table i have a table i just built last month but now a drill press and the miter saw can’t share the same table

    • Chris Marshall

      Dean,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • david

    please send me a pdf set of plans. this looks to be one of the most thoughtful designs i’ve seen, thanks, dbl

    • Chris Marshall

      David,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Wayne

    I really need a solution for moew accurate and safer crosscutting with my chop saw.

    Saw this one on Youtube and would really like a copy of the PDF and cutlist for the plan.

    I receive Woodworkers Journal in the mail every month but cannot seem to locate this issue.

    Thanks for the great work

    Wayne

    • Chris Marshall

      Wayne,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Pete

    Chris,

    I have been looking for a perfect miter station design and I think I found it. Would the drawings accomodate any miter saw. I have a 10 inch Hitachi c10fch2. I am a beginner DIY’r. Having recently retired from the military with 22yrs of service for medical disability. I am trying to occupy myself with woodworking. I would love to have a copy of this plan.

    V/R
    Pete

    • Chris Marshall

      Pete,

      Please check your email for the Miter Saw Station Cutting Diagram. To answer your question, you may need to modify the height and width of the sliding carriage in the project to accommodate your saw. Before you begin building your Station, work out those details first, if necessary.

      Thanks for your interest in the project!

      Best,

      Chris

  • C.A. Borst

    Chris,
    Please send me the pdf for the miter station – Thanks, Neal

    • Chris Marshall

      Neal,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Paul

    This is the miter saw station that I’ve always wanted. Great job. Can you please send me the pdf.

    • Chris Marshall

      Paul,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Kheong Cheah

    Hi Chris,

    Just saw your project article on Youtube. Love your design. Looks like you have thought of everything….

    Would appreciate a copy of your Cutting Diagram PDF. Am thinking of getting a Hitachi C12RSH 305mm Slide Compound Mitre Saw which should fit quite nicely on this station.

    Thanks in advance.

    • Chris Marshall

      Kheong,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Stan

    Can I get the plans for the ultimate miter saw stand, it looks great.

    Thanks

    • Chris Marshall

      Stan,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Brian Ezell

    Chris,

    Great design! My father has asked for a miter saw for the holidays. I am getting him a Milwaukee 6955-20, and your station would make a great father-son project for us after he opens it. I would greatly appreciate a copy of the plans and cutlist.

    Thanks for the great project,

    Brian

    • Chris Marshall

      Brian,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Robby whiteed

    Chris

    Please send me the PDF file on the miter saw station it looks to just what I’m looking for

    Robby. Thanks

    • Chris Marshall

      Robby,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Tom Correa

    Love this miter saw station you created. I would sure appreciate the PDF file so I could build one for my shop. Thanks and Merry Christmas to you and yours.
    Tom

    • Chris Marshall

      Tom,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • http://selogio@gmail.com Ralph Elogio

    Wow I just saw that video on you tube and was blown away.I am a novice when it comes to woodworking but I am willing to give this a try.Can you please Email me the cutting diagram for the miter saw work station.It will greatly be appreciated .Thanks ahead of time Chris.PS great work.

    • Chris Marshall

      Ralph,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Andy

    This station looks great. I’ve been searching the internet for the perfect miter saw station and this is it–by a long shot! Can you please send me the plans?

  • Andy

    Chris,
    This looks like the perfect miter saw station. Can you please send me the plans/diagram?
    Thank you!
    -Andy

    • Chris Marshall

      Andy,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • John F Torbett Jr

    Hello. Nice job with Ultimate Miter Saw Station in June 2010.
    Can you please send me PDF plans of it. Also what type woods being used as was not in the journal.
    Is it 3/4″ AC Plywood for the top or MDF?
    Thanks and Merry Christmas
    John F Torbett Jr

    • Chris Marshall

      John,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project, and hope you enjoy your holidays!

      Best,

      Chris

  • Clay Bearden

    Hi Chris,
    I just purchased a new miter saw and was looking for plans to put it on. Your miter saw station is what I’m looking for. Could you send me the plans for it?
    Thanks,
    Clay

    • Chris Marshall

      Clay,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • JWK

    Great project. Would love to have a PDF if you will. Many thanks!

    • Chris Marshall

      JWK,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Mike Loan

    I would like to build the Miter Saw Project. Please tell me how I can purchase the plans, pdf, etc. Thank you

    • Chris Marshall

      Mike,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Bill

    Please send me the pdf for the miter station

    • Chris Marshall

      Bill,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Matthew

    This design is great. Can you send me the plans for this project?

    • Chris Marshall

      Matthew,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Ken Kolpin

    Chris,

    A great design that has everything. I would love to have a copy of the plans and drawings.

    • Chris Marshall

      Ken,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Kevin Klinker

    Wow!
    I’ve been looking for plans just like this. Could I please have a PDF copy of plans and or cutting diagrams! Thanks Chris!
    Kevin Klinker

    • Chris Marshall

      Kevin,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Ky Lien

    Chris,

    Great project! Can you send me a copy of the Miter Saw Station Cutting Diagram?

    Happy Holidays!

    • Chris Marshall

      Ky,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • http://www.woodworkersjournal.com David

    Hello Chris,

    I too would appreciate it if you would email the plans for your miter saw station. I particularly like the movable miter saw platform.

    Thank you,

    Dave

    • Chris Marshall

      David,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Doug Brannon

    i really need to replace my mitersaw station. As i was searching WWJ, I saw this one and was very envious. Could you please send me a plan or cut list.

    Thank You,
    Doug

    • Chris Marshall

      Doug,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • tony

    Chris
    I am interested in your Miter Saw Station. Could you send me a copy of your plan and cutting diagram?
    thank you
    tony

    • Chris Marshall

      Tony,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Jason Rawls

    Chris, Great looking setup you’ve come up with. I would also like the project PDF.

    Jason

    • Chris Marshall

      James,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project!

      Best,

      Chris

  • Mike

    Great miter station.

    Can you please email the pdf of the cut sheet.

    Thanks, Mike

    • Chris Marshall

      Mike,

      Please check your email for the Miter Saw Station Cutting Diagram.Thanks for inquiring about the project!

      Best,

      Chris

  • Mike Kear

    Nice station – clean and well organised. And I like workshop pieces that are on wheels too, so i can rearrange my workshop as needs change. I dont need the plans, because i dont have a mitre saw. If I ever get one, I can use these pictures to draw up plans for a simliar one myself.

    How come all your offcuts are the same length?

  • Paul

    Hi Chris, Could you please email your plans to me for the miter saw work station. Great design!

    • Chris Marshall

      Paul,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project.

      Best,

      Chris

  • Jim

    Great station. I’d like the cut list too. Thanks!

    Jim

    • Chris Marshall

      JIm,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project.

      Best,

      Chris

  • Brett Burleson

    I love this station and can’t wait to build one please send the pdf.

    • Chris Marshall

      Brett,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project.

      Best,

      Chris

  • Brian

    Hi Chris. Could you please email me your mitersaw workstation plans. It looks like a great design.

    • Chris Marshall

      Brian,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project.

      Best,

      Chris

  • http://cutlist Ted Morison

    Chris:
    I just sent you an email before I came to this site. Please forward me a cut sheet for the Ultimate Miter Saw Station.
    Thanks,
    Ted Morison

    • Chris Marshall

      Ted,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project.

      Best,

      Chris

  • Jeff Parshley

    I also would like the Miter Saw Station Cutting Diagram.

    • Chris Marshall

      Jeff,

      Please check your email for the Miter Saw Station Cutting Diagram. Thanks for inquiring about the project.

      Best,

      Chris

  • http://msb1021@msn.com Jonathan

    Hi Chris,

    I too need the cut list and dimentions for your miter saw table.

    Thanks!

    Jonathan

    • Chris Marshall

      Jonathan,

      Please check your email for the Miter Saw Station Cutting Diagram, and thanks for your interest in this project.

      Best,

      Chris

  • Gilbert

    I’d love to have your Miter Saw Station Cutting Diagram. Been looking at different ones and this one seems to meet all the needs. Thanks.

    • Chris Marshall

      Gilbert,

      We’ve just made all of the plans for the Miter Saw Station, including the cutting diagram, available for $7.95 as a downloadable plan. Here’s a link to find out more:

      http://woodworkersjournal.com/Ultimate_Miter_Station

      Thanks for inquiring about the project!

      Best,

      Chris

  • Pingback: Wood You Like To Know | Adam’s Ultimate Miter Station

  • chris

    I am very impressed with this miter saw station can you please send me the design?
    Chris

  • Pingback: Adam’s Ultimate Miter Station | The Wood Whisperer

  • Jack

    On or about Jan. 4 I will start building this “Ultimate” miter saw stand. While reviewing the original plans, I saw the measuring error (ie. 18 in) and just wandered if there are others discovered since? I don’t see any. If you have any hints, I’d appreciate those also. Thanks and Merry Christmas.

  • Chris Marshall

    Jack, so far as I am aware, there have been no other errors revealed in the plans to date. Hope you enjoy building the Miter Saw Station, and please send photos of it into the magazine to earn your bragging rights! We’d love to see it. Thanks for writing in.

    Chris Marshall, Field Editor

  • Jack

    Thanks, Chris.
    I have two questions:
    1. Where or how do I find photos that all these guys sent showing their miter saw stand? I guess that I’m missing something.

    2. I have not been able to find a suitable photo nor plans for a TV stand or cabinet for the net flat screens. Are they out?

  • Kyle Audd

    Chris,

    Is the link in the article for the cutting diagram the same diagram you were emailing to previous request? Also, are the plans which are available for purchase very detailed or more of an overview?

    Thanks,

    Kyle

  • keegan oldham

    hey Chris, nice project! i really like this design can you send me plans?

    thanks always,
    keegan oldham.

  • Neal

    Really think this is a cool work station, and I would love to have a copy of the plans for this miter saw station!

  • Matt

    What are the dimensions of this station? I may want to purchase the plans, but would like to know the dimensions first. Also, do you have a rough estimate of the cost of materials to build this station? I know it depends on where you get them, but I’m just talking about a ballpark figure. Thanks in advance.

  • Bob

    Chris,

    Can you make the face frame of the cabinet first and then attach everything with Pocket hole joinery?

  • shaun

    I have been looking for the right miter station for my garage workshop and this would be awesome to have. GREAT JOB!

  • Jd

    Nice table!! is it too late to get the cutting plans and assembly diagrams?? Thanx.

  • Desi

    Can you give me more detail on how the side dust port goes to the miter saw and location. I have the plans but I don’t see were the physical location are.

  • Kieran

    How can i get plans of this

  • Matt

    This is one of my favorite designs I’ve found. Are plans still available?

  • Ray

    Hi I was looking for a Miter saw table and all I have seen was the same O same O until i seen yours first words was WOW I like , I’m looking to build one just got a miter saw and a 10″ table saw also looking to build one for it as well it would give my son and I a project to do together he is wanting me to teach him what I use to do with wood

  • Rob Fegg

    Great station!! Would you mind sharing the plan and cutting list with me? Thanks a bunch

    Rob

  • Julien Mercier

    Hello,

    would it be possible to send me the plans and cutting list?

    thanks a bunch!

  • Kent M.Cortez

    Great informations on miter saw. I needed to get something for my dad , I guess I found it!

Posted in: