Friction Polish – Fast and Friendly

Friction Polish – Fast and Friendly

I just can’t deny it – I am an instant gratification sort of woodworker. So, when I am looking for a clear finish on my turned pieces – and I predominantly turn bowls – I almost always reach for a friction polish. They are easy to apply, build up quickly and look great.

What’s a Friction Polish?

The author applies his liquid friction polish to a spinning maple bowl. As the friction spreads and polishes the product, a smooth, shiny finish begins to appear.
The author applies his liquid friction polish to a spinning maple bowl. As the friction spreads and polishes the product, a smooth, shiny finish begins to appear.

A friction polish is designed to be applied to wood and then burnished to make the product flow – to be smoothed out over the prepared surface. Burnishing (rubbing vigorously with a cloth or piece of ultra-fine steel wool) can be hard work on a flat piece of wood. But it’s pretty easy if the wood is spinning on a lathe. For that reason, friction polish is a real favorite for turners. Common formulas for friction polish feature a combination of shellac and a wax of some type. They can be formulated in a liquid or found in bar form – like the widely used HUT™ Products Bar.

Just Do It

Friction polishes are a woodturner's secret weapon when it comes to a fast, beautiful finish. They work well on natural (clear finish) or stained wood.
Friction polishes are a woodturner’s secret weapon when it comes to a fast, beautiful finish. They work well on natural (clear finish) or stained wood.

There are a couple of ways to apply a liquid friction polish. You can wipe on a light coat while the piece is stationary on the lathe (or off of the tool), then spin the piece and use a cloth dampened with the polish to smooth out and flow the finish evenly across the piece. This is an instance where light applications are better than heavy coats.

As a “plunge right in there” type, I prefer the second method: applying the finish with a soft cloth right to the spinning bowl. I use a moderately fast speed and just wipe it on. I like to have a strong directional light aimed at the piece, so I can see the change as I apply the product.

Different brands of friction polish vary a bit as to the proper mode of application – so read their instructions and experiment in order to get your best results.

Posted in:

  • Michael Kratky

    Friction polish unfortunately ranks last for durability and the surface needs to be nearly flawless for it to work well.