With a project like this in the house, it almost makes you WANT to get the laundry done…
This is the built in laundry table / cabinet I made for our laundry room. The cabinet is 24″x74″ and is made from 3/4″ Birch plywood and red oak trim. The drawers are poplar with birch plywood bottoms and the drawer fronts are solid red oak strips laminated onto 1/2″ MDF, the base is 2×12 pine with a 1/4″ birch plywood skin, and the counter top is 25″x75″x2 black concrete backfilled with white Portland cement, polished and seal with food safe bees wax. The cabinet finish is 3 coats of satin General Finishes Arm-R-Seal. The entire unit weighs almost 400 lbs and had to be installed on site 1 piece at a time.
- Eric Ritschel; Jacksonville, FL
If you’d like some more inspiration for your laundry room, check out this other reader-submitted project.
Do you have a project you’d like to share? Click here to send it in!
Internet Production Coordinator