This project plan appeared in Woodworker's Journal Volume 8, Issue 4, Page 45. Jul/Aug 1984. The three truths of this life seem to be that you'll never be rich enough,
thin enough, or own enough clamps! Here's a shop-built version with a sliding
head that's set up with a cam, so you can apply varying degrees of pressure.
If you own some hardwood scraps, you can make dozens of these for the cost of
the cork that lines the jaws.
Workshop & Studio
Approx: 1" x 6" x as long as you like
Note: this plan is a photocopy of the original article. Shipping and handling is free for photocopied plans. Your order total will show a shipping charge, but it will be removed on your invoice.
This project plan appeared in Woodworker's Journal Volume 8, Issue 4, Page 45. Jul/Aug 1984. 
