The Rod less Crib Gate and Springs Hardware Kit allows you to raise and lower the crib gate easily. Apply a light amount of pressure to the lower gate, lift up with one hand and the gate slides down smoothly. Simply raise the gate to the upper position and it automatically locks in place.

Kit includes rod less gate hardware and standard full size crib spring.

Gate hardware is brown plastic, and screws are provided.

The size of Hardware Kit, this package prohibits shipment through the postal system. It must be shipped by another carrier (i.e. UPS, RPS, etc.). We must have a physical address to ship the package to. Because this is an oversized package, there will be an additional charge of $13.00 added to your order when processed internally.

This plan requires both the Rod less Spring Gate Hardware Kit and the Fastener Hardware Kit to complete the project.

Item #32405 Rod less Crib Gate and Springs Hardware contains:

• 1 each - Crib Springs
• 1 hardware package containing:
  • 1/4'' - 20 x 3/4'' Machine Screws
  • #7 x 5/8'' Flathead Nickel Screws
  • #4 x 5/8'' Flathead Nickel Screws
  • #10 x 5/8'' Flathead Nickel Screws
  • #7 x 1'' Flathead Nickel Screws
  • 1/4'' - 20 Threaded Insert
  • Instruction Sheet

Item #33874 Fastener Hardware Kit contains:

• 1/4'' - 20 x 3/4'' Machine Screws
• 1/4'' - 20 x 3-1/2'' Connector Bolt
• 1/4'' - 20 x 2'' Connector Bolt
• 1/4'' - 20 Threaded Insert