Closer Look at Our Full-featured Miter Saw Station

May 7th, 2010 by
255 Comments

Chris Marshall shows us around his Ultimate Miter Saw Station, featured in the June 2010 issue of Woodworker’s Journal magazine.

Matt Becker
Internet Production Coordinator

EDITOR’S NOTE: Due to the enormous amount of interest in this project, we have made the Ultimate Miter Saw Stand (including the plans for the entire project and the optional Scrap Bins, as well as the Cutting List) available as a Downloadable Plan in our online store. Click here to purchase and receive the plan immediately!

Related posts:

 

Tags: , , , , , , , , , ,

255 Responses to “Closer Look at Our Full-featured Miter Saw Station”

  1. Ron says:

    Do you have a wood material list with cut diagram for this stand?

  2. Chris Marshall says:

    Ron,

    I do have a plywood cutting diagram and an overall bill of materials for the plywood and solid wood. Please post your email address and I’ll forward a PDF of it to you.

    Thanks for your interest in the Miter Saw Station.

    Best,

    Chris Marshall

  3. Bill says:

    I would like the cutting diagram and bom also. Thank You Bill

  4. Jhennicea Morrow says:

    Ditto. I would appreciate both the cutting diagram and bill of materials as well. I want to surprise my husband with this (a completed cabinet) for our anniversary. I am still new to woodworking, but can do a decent job of following directions.
    Great design!

    Thanks, Jhennicea Morrow

  5. holly thisdale says:

    Double ditto – putting together my first workshop and this looks like a must have. I too am pretty new to woodworking. Thanks! Holly

  6. Chris Marshall says:

    Holly,

    Just sent a PDF to your email address.

    Thanks!

    Chris

  7. Chris Marshall says:

    Jhennica,

    Just sent a PDF to your email address. Thanks! Chris

  8. Chris Marshall says:

    Ron,

    Just sent a PDF to your email address. Thanks! Chris

  9. Karl says:

    Chris,

    Great design! Can you please forward me the information also? I’m a newbie and this looks awesome. Much appreciate it, thanks!

    Karl

  10. Chris Marshall says:

    Karl,

    Just sent a PDF to your email address. Thanks! Chris

  11. Jerry Glisky says:

    Chris I’m in the process of arranging a new workshop and was looking for a miter work station. Your’s looks like it is just what I’ve been looking for. Can you send me a PDF too. Thanks in advance.

  12. Duane Shults says:

    Need a cut sheet for the “Ultimate Miter Saw Stand” & material type. How many sheets & type of plywood did you use? Is all of the edging & face frame maple?

    Thanks, Duane

  13. Chris Marshall says:

    Duane,

    Just sent a PDF to your email address. Thanks!
    Chris

  14. Chris Marshall says:

    Jerry,

    Just sent a PDF to your email address. Thanks!

    Chris

  15. Max Robinson says:

    This station looks like just what I need. Can you send the cutting diagram and bill of materials to me as well.

    Thanks, Max

  16. Chris Marshall says:

    Al,

    I just send a PDF to your email address. Thanks! Chris

  17. Al Klob says:

    Chris

    Please send the PDF cutting diagram to me again as I made a mistake in my email address.

    Al Klob

  18. Chris Marshall says:

    Al,

    Just sent it to you again at the new email address.

    Thanks,

    Chris

  19. bill says:

    Just what I have been needing. need pdf. Thanks Much

  20. Dave Steward says:

    Chris, can you please send a cuting list & bom to one of your Ausie fans. Thankyou.

  21. Jimm says:

    Thanksfor sharing this with us!I trulylike this objectand you are given here really a superbinformation.Thanks.Keep it up.keep up the high-qualityworks.keep blogging.

  22. Chris Marshall says:

    Bill,

    I just sent a PDF to your email address. Thanks! Chris

  23. Chris Marshall says:

    Dave,

    Just emailed you that cutting diagram. Hope you are enjoying your winter down under.

    Best,

    Chris

  24. Stafford White says:

    Chris..
    Please add me to the list of woodworkers that would love to have the cutting diagram and bill of material. I have a new miter-saw that I haven’t even used yet, and would love to give it a great-looking home. Might even be a good idea just to add a download link next to the video link. I’m sure many of us think that this Miter-Saw Station would be a great thing to build in our shops.

  25. Chris,
    Hope I’m not to late to get that PDF on the MiterSaw station. Thanks,
    Sean……..

  26. Chris Marshall says:

    Sean,

    Just emailed you the cutting diagram. Enjoy the project!

    Chris

  27. Chris Marshall says:

    Stafford,

    Just sent you that cutting diagram to your email address.

    Best,

    Chris

  28. Peg Lang says:

    Hi Chris,
    Your woodworking talents far surpass mine. Please send the PDF to me, also.
    I will appreciate both the cutting diagram and bill of materials as well.
    Peg

  29. Chris Marshall says:

    Peg,

    Don’t underestimate yourself…you can do this project! I just sent the PDF to your email address.

    Thanks,

    Chris

  30. Doug McElroy says:

    I would like a copy of the cut list also please.
    Thank you , Doug

  31. chuck Ward says:

    Chris can you pdf me the plans for assembeling the stand. Thanks C.W.

  32. Chris Marshall says:

    Chuck,

    Just sent you the PDF to your email address.

    Thanks,

    Chris

  33. Chris Marshall says:

    Doug,

    Just sent the cutting diagram to your email address.

    Thanks!

    Chris

  34. Andy Andrews says:

    I ve been trying to make up my mind about a mitresaw station and i just love your design and will be building it.

  35. Rick Mayo says:

    Your Miter saw Station is just what I have been looking for. Could you send me the plywood cutting diagram and an overall bill of materials.

    Thanks

  36. Chris Marshall says:

    Rick,

    Check your email account. The PDF is coming your way.

    Best,

    Chris

  37. Mike London says:

    Hi, Chris.
    I am new to WJ. Hope you have some pdfs left over so I can get started on this project for my new 12″ sliding miter saw.
    I am thinking about adding a leveling device to the bottom. Any thoughts on that?
    Thanks very much.
    Mike London

  38. Chris Marshall says:

    Mike,

    The PDF is coming your way. Check your email account.

    Thanks!

    Chris

  39. Susie says:

    Great design! I’m a woodworking newbie and would like to give this a try. Please send the PDF to me as well. Thanks so much!

    Susie R

  40. Gray Goodman says:

    Chris,

    Hate to ask, but any chance you’d send me those plans as well – I’d love to built that very cool looking station for my new Bosch 10″ saw.

    Thank you

  41. Chris Marshall says:

    Susie,

    Just send the PDF to your email address.

    Thanks,

    Chris

  42. Chris Marshall says:

    Gray,

    Just send the PDF to your email address.

    Thanks,

    Chris

  43. Ron Stewart says:

    I also would like a copy of the PDF and plans- have a mobile miter saw station, but need a good one like yours for the shop. Thanks

  44. Tim Fry says:

    Would also like a set of plans. Thanks

  45. Chris Marshall says:

    Tim,

    I just emailed the cutting diagram to you.

    Thanks,

    Chris

  46. Don Joseph says:

    Chris,

    Loved your miter saw workstation and would love to receive the materials list and plans. Am about to purchase my first mite saw, a DeWalt-718.

    Thank you.
    Don Joseph

  47. Chris Marshall says:

    Don,

    Check your email address for the Cutting Diagram. I just sent it to you.

    Thanks!

    Chris

  48. Scott Freeman says:

    I would appreciate both the cutting diagram and bill of materials as well. I can finally replace my table that I built around my radial arm saw. I am going to rearrange my shop and this looks like a nice center piece to work around. It looks mobile also which makes it even more appealing.

  49. Chris Marshall says:

    Scott,

    I just sent that cutting diagram to your email address.

    Thanks,

    Chris

  50. Leonard Killion says:

    Well I guess it’s my turn to ask for the PDF. Looks like this will be perfect for my “rolling” shop. Thanks in advance and keep up the good work.

    Leonard

Leave a Reply