Closer Look at Our Full-featured Miter Saw Station

May 7th, 2010 by
255 Comments

Chris Marshall shows us around his Ultimate Miter Saw Station, featured in the June 2010 issue of Woodworker’s Journal magazine.

Matt Becker
Internet Production Coordinator

EDITOR’S NOTE: Due to the enormous amount of interest in this project, we have made the Ultimate Miter Saw Stand (including the plans for the entire project and the optional Scrap Bins, as well as the Cutting List) available as a Downloadable Plan in our online store. Click here to purchase and receive the plan immediately!

Related posts:

 

Tags: , , , , , , , , , ,

255 Responses to “Closer Look at Our Full-featured Miter Saw Station”

  1. Robert Nieding says:

    Chris:

    Would love a pdf of the material list along with the cut list and plans. Was going to build another station but after seeing this one, I really like some of the features.

    Thanks in advance !
    Robert

  2. Chris Marshall says:

    Robert,

    Just sent the Cutting Diagram to your email address.

    Thanks!

    Chris

  3. Chris Marshall says:

    Leonard,

    Check your email address for that Cutting Diagram.

    Thanks!

    Chris

  4. Lawson says:

    I really like this design, can you send me the plans for this as well ? Thanks!!

    -Lawson

  5. Chris Marshall says:

    Lawson,

    Check your email for that cutting diagram, and thanks for inquiring about the project!

    Best,

    Chris

  6. Charles Petrin says:

    This is exactly the saw station I’ve been looking for. Would love to see the plans. Thanks!

    -Chuck

  7. Dennis says:

    I would like the pdf as well. Thanks,

    Dennis

  8. Chris Marshall says:

    Dennis,

    Sorry for the delay in getting that PDF cutting diagram of the Miter Saw Station to you. Just emailed it. Hope you enjoy the project!

    Chris

  9. Chris Marshall says:

    Chuck,

    The cutting diagram for the Miter Saw Station is coming your way. Hope it helps you if you decide to build the project. Thanks!

    Chris

  10. Bob says:

    Hello,

    Could you please send a copy of plans and cutsheet.
    Thanks in advance.
    Bob

  11. Chris Marshall says:

    Bob,

    Check your email for that Miter Saw Station Cutting Diagram.

    Thanks!

    Chris

  12. Robin Johanson says:

    Hi Chris,

    Just saw your Miter Saw Station on YouTube and was very impressed. Would love to get the plans/cutting diagram if possible. Something i could order online in PDF? Thanks a bunch; nice work!

    Robin

  13. Chris Marshall says:

    Robin,

    Please check your email for the Miter Saw Station Cutting Diagram. Hope you enjoy building the project!

    Best,

    Chris

  14. Frank Speyerer says:

    Chris, I would also appreciate the PDF.
    Thanks in advance.
    Frank

  15. Kirk Anthony says:

    Mr Marshall, please send all your information about this work station. I’ve built a table and have wanted to drop a miter saw into it. When I saw your video I thought it will solve alot of problems for me. I appreciate what you’re offering here! After looking at this saw station I found your “crusty work bench” plan and I’ve got it also. Thank you. Kirk

  16. Chris Marshall says:

    Kirk,

    Check your email for that cutting diagram.

    Thanks,

    Chris

  17. Chris Marshall says:

    Frank,

    Check your email for that cutting diagram.

    Thanks,

    Chris

  18. Stafford White says:

    Greetings Chris..
    That is one great looking Miter Station, and I would feel honored to be sent the PDF file(s) that accommodate it. I still have a Miter saw that I received for Christmas in ’08 in the original box, and would really like a dedicated table to use it on, so it can live up to its potential.
    Thank you very much.

    Stafford

  19. Brian Barnes says:

    Hi Chris – I’d really appreciate you sending me the cut list for this miter station! Keep up the good work! Brian

  20. John says:

    Is this available for download? I am so impressed with this.

  21. James Sanders says:

    Just saw your Miter Saw Station was very impressed.

    Would love to get the plans/cutting diagram if possible.

  22. Patrica Tuttle says:

    Wow, I’d love to get the plans for this too. Thank you!!

  23. Frank Murray says:

    Chris,
    Have be meaning to build this since the magazine was delivered but have not had time to make up a cutting diagram. Could you please send me the pdf.
    I will be using a Festool Kapex so I will have to check dimensions to ensure the table of Kapex is level with feed tables of your design. Have you any thoughts or are all drop saws the same table height?
    Regards
    Frank

  24. DENNY HYDE says:

    MR MARSHALL, I FOUND THE MITER SAW CART ON YOU TUBE, AND FELT IT WAS ONE I WOULD LIKE TO BUILD. SO I SIGNED UP FOR A SUBSCRIBTION TO YOUR MAGAZINE, AND WOULD REQUEST THE PDF PLANS FOR THE MITER SAW CART. THANKS FOR BUILDING THIS. DENNY

  25. Ed says:

    Hi Chris,

    Would really appreciat the PDF Cutting List. Send at your convenience.

    Thanks,
    Ed

  26. Everaldo Seckler says:

    Oi Chris, excelente esta bancada para serra esquadria. Gostaria de fazer uma para minha serra, peço que envie o plano para elaboração da mesma.
    Abraço
    Everaldo.

  27. Ron Davis says:

    One Ron To RON could you send me copy of your pdf for the the mitter saw station thanks Ron

  28. Thomas Scarboro says:

    Chris;

    I too would like the PDF plans for the Miter Saw Station. I plan to shorten the station to one drawer width either side of the miter saw location.

    In advance I thank you very much.

    Tom

  29. Ryan says:

    Hi Chris great station. I missed the print issue and just gave myself a swift kick. The station looks great. Please can you forward the cutting list.
    Ryan

  30. Chris Marshall says:

    Ed,

    Please check your email address–the PDF email I’m sending you continues to bounce back to me undelivered. I think you may have left something out of your email address.

    Thanks,

    Chris

  31. Chris Marshall says:

    Ryan,

    Check your email for the project PDF.

    Thanks,

    Chris

  32. Chris Marshall says:

    Thomas,

    Check your email for the project PDF.

    Thanks,

    Chris

  33. Chris Marshall says:

    Ron,

    Check your email for the project PDF.

    Thanks,

    Chris

  34. Chris Marshall says:

    Denny,

    Check your email for the project PDF.

    Thanks,

    Chris

  35. Chris Marshall says:

    Frank,

    Check your email for the project PDF.

    Thanks,

    Chris

  36. Chris Marshall says:

    Patricia,

    Check your email for the project PDF.

    Thanks,

    Chris

  37. Chris Marshall says:

    John,

    Check your email for the project PDF.

    Thanks,

    Chris

  38. Chris Marshall says:

    Brian,

    Check your email for the project PDF.

    Thanks,

    Chris

  39. Chris Marshall says:

    Stafford,

    Check your email for the project PDF.

    Thanks,

    Chris

  40. Thomas Scarboro says:

    Chris;

    I received the cutting diagram PDF, but, not the assembly drawing. If this isn’t available please let me know.

    Tom

  41. Chris Marshall says:

    Tom, the exploded view and elevation drawings are all in the June print issue. Sorry, but I don’t have any other drawings to share. Let me know if you have any construction questions, and I’ll do my best to answer them.

    Chris

  42. tim cope says:

    Dear Chris, please send me the cut list.
    God Bless,Tim

  43. Al Phelps says:

    Great looking project! Please send me the plans. Thanks for all the great tips you’ve done also.

  44. Frank Moeller says:

    Sorry this is so late but, will you please send me copies of the BOM and cutting diagram for your miter saw workstation. Thanks.

  45. Chris Marshall says:

    Tim,

    The PDF should be in your email.

    Thanks!

    Chris

  46. Chris Marshall says:

    Al,

    Check your email for the Cutting Diagram PDF.

    Thanks,

    Chris

  47. Chris Marshall says:

    Frank,

    I just emailed you the Cutting List PDF.

    Thanks,

    Chris

  48. Jim Severson says:

    Chris – I had ordered Woodworkers Journal on June 29th, and now wish I had ordered it in April instead. Is there any way that I can get my hands on the plans too. I am sooo pleased with this magazine and I haven’t even got the first issue yet!
    Jim

  49. Chris Marshall says:

    Jim,

    The PDF should be in your email box. Check my message about information to order the June 2010 back issue—you’ll want that to supply the rest of the details for building the project.

    Thanks for subscribing and for your interest in the Miter Saw Station!

    Best,

    Chris

  50. Anna says:

    Chris,
    I loved the Miter Saw Station video. May I have a copy of the PDF?
    Thank you,
    Ana

Leave a Reply