Closer Look at Our Full-featured Miter Saw Station

May 7th, 2010 by
255 Comments

Chris Marshall shows us around his Ultimate Miter Saw Station, featured in the June 2010 issue of Woodworker’s Journal magazine.

Matt Becker
Internet Production Coordinator

EDITOR’S NOTE: Due to the enormous amount of interest in this project, we have made the Ultimate Miter Saw Stand (including the plans for the entire project and the optional Scrap Bins, as well as the Cutting List) available as a Downloadable Plan in our online store. Click here to purchase and receive the plan immediately!

Related posts:

 

Tags: , , , , , , , , , ,

255 Responses to “Closer Look at Our Full-featured Miter Saw Station”

  1. Jason Zielke says:

    Gday Jim,

    I just ordered the back-issue of Woodworkers Journal on Zinio so i could get these plans. Any chance you could email me the PDF’s as well so i can print a hard copy of them?

    Take care,

    Jase

  2. Jcoreas says:

    Just saw your Miter Saw Station(love it) was very impressed I
    Would love to get the plans/cutting diagram if possible.
    I believe it will keep me busy acouple weekends.how do I get them?
    thank you.
    J.C.

  3. Chris Marshall says:

    J.C.,

    Check your email for that Miter Saw Station cutting diagram.

    Thanks for your interest in the project!

    Chris

  4. Chris Marshall says:

    Jason,

    Check your email for that Miter Saw Station cutting diagram.

    Thanks for your interest in the project!

    Chris

  5. Chris Marshall says:

    Anna,

    Check your email for that Miter Saw Station cutting diagram.

    Thanks for your interest in the project!

    Chris

  6. Jim Neff says:

    Chris,
    Please forward the PDF cut list to me also. I am looking forward to building this project in a newly remodelled woodshop. Thanks.

  7. Chris Marshall says:

    Jim,

    Check your email for that Miter Saw Station Cutting Diagram.

    Thanks for inquiring about the project,

    Chris

  8. Gary Ono says:

    Hi Chris,

    Just getting back into woodworking after a few year layoff due to medical reasons. I saw your short video on your Ultimate Miter Saw Station. What a great project and ideal for my small shop. Any chance you could forward me the cutting diagram/plans? It would be greatly appreciated.

    Thanks

    Gary

  9. Mike says:

    Now my stand looks outdated and unusable after seeing yours. I, too, would like the plans. i can see lots of usable storage space in this project.

    Thanks

    Mike

  10. Eric Allison says:

    Chris,
    I loved the Miter Saw Station video. I’ll have to see if I can get my hands on the June issue. In the meantime may I have a copy of the PDF?
    Thank you,
    Eric

  11. Len says:

    Could you please send me the PDF file plans for this project. Thank you.
    Len

  12. tenere says:

    please am interest to this project i was in africa building wood entry doors

  13. Chris Marshall says:

    Tenere,

    Check your email for the Miter Saw Station PDF Cutting Diagram.

    Hope you enjoy building the project,

    Chris

  14. Chris Marshall says:

    Eric,

    Check your email for the Miter Saw Station PDF Cutting Diagram.

    Hope you enjoy building the project,

    Chris

  15. Chris Marshall says:

    Mike,

    Check your email for the Miter Saw Station PDF Cutting Diagram.

    Hope you enjoy building the project,

    Chris

  16. Chris Marshall says:

    Gary,

    Check your email for the Miter Saw Station PDF Cutting Diagram.

    Hope you enjoy building the project,

    Chris

  17. Chris Marshall says:

    Len,

    Check your email for the Miter Saw Station PDF Cutting Diagram.

    Hope you enjoy building the project,

    Chris

  18. Mark Eilts says:

    I just saw the Ultimate Miter Saw Station article. Very impressive. Could you send the PDf so could have a hard copy of the plans and cutting diagram? What type of wood did you use on this project?

    Mark

  19. Chris Marshall says:

    Mark,

    I just emailed you that cutting diagram. I used maple plywood and solid maple for my project, but really any species would work fine (oak, birch, cherry, pine, poplar).

    I hope you enjoy building the project.

    Best,

    Chris

  20. Jim M says:

    Chris,

    Now that’s a nice miter saw station. Would you please send me the plans?

    Thank you.

  21. Chris Marshall says:

    Jim,

    Please check your email for the Miter Saw Station Cutting Diagram.

    Thanks for your interest in the project!

    Best,

    Chris

  22. Marshall Geller says:

    Chris,

    Very Cool!

    I am in the process of designing my shop and that looks like a winner!

    Can you send me the plans?

    Thanks,
    Marshall

  23. Ken Wilsob says:

    Could you please send me the pdf. of your miter saw station, thanks.

    Ken

  24. Mel Wright says:

    I would also like to get a copy of your plans for this project.
    Thank you in advance.

  25. Chris Marshall says:

    Mel,

    I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it!

    Best,

    Chris

  26. Chris Marshall says:

    Ken,

    I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it!

    Best,

    Chris

  27. Chris Marshall says:

    Marshall,

    I just emailed you the cutting diagram for the Miter Saw Station. Hope you enjoy building it!

    Best,

    Chris

  28. Ray says:

    Very nice workstation. I just ordered a copy of the June 2010 issue do I need a pdf of the cut list as well. If so would you mind sending along.

    Thanks in advance.

    Ray

  29. Chris Marshall says:

    Ray,

    Check your email for that PDF you requested for the Miter Saw Station.

    Thanks for inquiring about the project!

    Best,

    Chris

  30. Terry Murphy says:

    Hi Chris:

    The project looks great.Could you please send me copies of the drawings?

  31. Jim Land says:

    Chris, Great Job on designing and building your mitersaw station. I see from the other posters that you have a Cutting list and a list of materials available. If so I would like one also.
    Thanks, Jim Land
    in Herndon, Va.

  32. Richard Hicks says:

    Chris,

    Absolutely a wonderful design.

    Please send me diagram for the Miter Saw Station…..Please…

    Thank you for taking the time to help all woodworkers. Greatly apreciated!

  33. Chris Marshall says:

    Richard,

    Please check your email for the miter saw station cutting diagram you requested.

    Thanks for your interest in the project!

    Best,

    Chris

  34. Chris Marshall says:

    Jim,

    Please check your email for the miter saw station cutting diagram you requested.

    Thanks for your interest in the project!

    Best,

    Chris

  35. Chris Marshall says:

    Terry,

    Please check your email for the miter saw station cutting diagram you requested.

    Thanks for your interest in the project!

    Best,

    Chris

  36. Mark C says:

    Like your plans can you send me the material list. Working on setting up new shop and this looks like what I have in mind.

    Thanks,

    Mark C.

  37. J. Bell says:

    Nice station Chris. Please forward the .pdf.

  38. Chris Marshall says:

    J. Bell,

    Please check your email for the miter saw station cutting diagram you requested.

    Thanks for your interest in the project!

    Best,

    Chris

  39. Chris Marshall says:

    Mark,

    Please check your email for the miter saw station cutting diagram you requested.

    Thanks for your interest in the project!

    Best,

    Chris

  40. Mike D says:

    Great article Chris, thank you for putting this together! Any chance you can send along the cut list pdf as well? Thank you ahead of time!

    Mike

  41. Jim Sanders says:

    Chris,
    I like your stand.
    Please e-mail me a pdf file.
    I will e-mail you a picture when I finish building my stand.

    Jim

  42. Chris Marshall says:

    Jim,

    Please check your email for the miter saw station cutting diagram you requested. I’d love to see a photo of your finished station!

    Thanks for your interest in the project.

    Best,

    Chris

  43. Mike Gleason says:

    Chris,
    What a well thought out miter station. Could I please get the plans and cut list? Thanks Mgleason

  44. Chris Marshall says:

    Mike,

    Please check your email for the miter saw station cutting diagram you requested.

    Thanks for your interest in the project!

    Best,

    Chris

  45. bert says:

    Could you please send me the PDF file plans for this project.
    Thank you.
    bert

  46. Chris Marshall says:

    Bert,

    Please check your email for that cutting diagram.

    Thanks for inquiring about the project!

    Best,

    Chris

  47. Seddon Randall says:

    Chris, The miter saw station looks great, I am a 74 year old Aussie novice thank you for putting this together! Any chance you can send me the PDF file plans for this project
    Thanking you
    In anticipation
    Syd Randall

  48. Greg says:

    Chris,

    Very Nice! Ten years ago, I built a miter saw station similar but smaller. We were building a giant hotel, which I won’t mention the name. On my station, I had two drawers and an open cabinet to keep hand and power tools in. I rolled that saw station from one end of that building to the other. Bottom floor to the top. We had to carry it up and down the stairs because elevators weren’t installed yet. After seeing your miter saw station, I would like to build a newer, updated one. Can you send me the plans for your project. Thanks, Greg B

  49. Chris Marshall says:

    Greg,

    Please check your email for that cutting diagram.

    Thanks for inquiring about the project!

    Best,

    Chris

  50. Chris Marshall says:

    Syd,

    Please check your email for that cutting diagram. Thanks for inquiring about the project!

    Best,

    Chris

Leave a Reply