Pocket screws sure make face frame construction easy, don’t you think? But, there’s one hitch in their getalong for me: clamping up the joints before driving the screws. Since I don’t use pocket screws day in and day out, and for lack of a quick and better solution, I still grab those locking pliers with the disk-shaped heads to hold my joints tight. Sometimes they work as advertised, sometimes they don’t. The longer the joint parts, the harder it is to wrangle them with those clamps.
Posts Tagged ‘Face Frame’
3 Comments »
For the June print issue, I’m building a big plywood shop project. Several pieces in the project include some rather thick edging strips, which can be difficult to clamp tightly in place. Especially when they’re on the ends of an 8-ft. sheet of plywood.
I’ve used thicker edging before in a few projects, and each time I’ve wondered about those funky C-clamps made for jobs like these. They’ve got three screw jaws instead of just one—the most helpful being the third that runs through the spine of the clamp, perpendicular to the other two.
Well, last week I took the plunge and bought a half dozen to give them a try.