Here is a Gun Display Case that I made for a friend. It can be laid on a table or hung on the wall. It is made of Paduke using Sommerfeld's Tools Junior Raised Panel Set. It is finished using Rust-Oleum's Specialty Lacquer using 5 coats. I put a foam type strip around the back edges so that it wouldn't scratch anything he put it on. - Karl Riley
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.