|
Labeling Chippers and Shims
|
If you cut many box joints or dadoes for cabinet shelving, you know how important it is to get a precise fit. When I finally arrive at that perfect combination of chippers and shims, I use a permanent marker to label each of the blade parts. Then I record which chippers and shims I used for the cut on a recipe card I keep stored in my dado blade case. That way, I never have to experiment the next time I need to replicate the cutting width. I just pull out the appropriate card, match up the proper chippers and shims and I'm ready to start cutting. Perfect width every time!
- Chris Marshall
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|