|
No-measure Gauge for Checking Square
|
To check my diagonals for square, I use an old telescoping radio antenna with the ends fashioned into points to fit into corners better. I extend the antenna one way, then carefully lift it out and see if it fits the space between the other pair of diagonals. No need to measure.
- Mark Thiel; Coral Springs, Florida
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|