JET has a new 14” 3HP Steel Frame Bandsaw (item 714550), which has a resaw height of 13-1/2” and a blade-to-frame cutting width of 13-1/2”. The 3hp, single-phase, 230-volt motor delivers a blade speed of 3,000 sfpm. The 360-pound band saw has a 21-1/2” x 16” cast-iron table set at 39” from the floor which tilts 0 to 45 degrees right and 0 to 10 degrees left. The angle is set with a cast-iron handwheel and large scale. The band saw has a standard miter slot and an extruded aluminum fence that measures 18-1/4” x 6” and slides on a steel guide rail. The fence is fully adjustable. The cast-iron, nine-spoke upper and lower blade wheels accommodate 125”-long blades, ranging from 1/8-inch to ¾-inch wide. Two 4” diameter dust ports are located on the back of the band saw. The JET 14” 3HP Steel Frame Bandsaw has a suggested price of $1,799.99.